Rayleigh Instruments - Multifunction Meters
Multifunction Energy Meters for single-phase and three-phase MID and non-MID energy monitoring applications - direct connection or current transformer operated with a range of communication protocols including pulse, Modbus and Mbus. DIN rail mounting, panel mounting models available.
-
IME Conto 72-Sh Single and Three Phase Network Panel Mounted kWh Network Meter -...
Call for Prices- Kilowatt hour meter / active energy meter
- 72 x 72mm flush panel mounting
- Single phase & 3 phase (3 or 4 wire) network unbalanced load
- Active energy class 1 (EN62053-21)
- Reactive energy class 2 (EN62053-23)
- Power demand
- Power max demand (resettable)
- Partial active and reactive energy (resettable)
- Phase Current
- Phase to phase and phase to neutral voltage
- Frequency
- Phase active power
- Phase reactive power
- 3 phase active/reactive and apparent power
- Power factor
- –/1A or –/5A current transformer operated
- 190…440V 50/60Hz measured voltage
- 8 digit LCD display
- Self supplied auxiliary
- Pulsed output
- Programmable CT ratios
-
IME Conto D4-Pt Single-Phase & Three-Phase 3-4 Network kWh Meter - Connecti...
Call for Prices- Kilowatt hour / active energy meter
- 4 module DIN rail mounting
- -/5A current transformer operated
- 3 phase 4 wire network unbalanced load
- Active energy class 1
- Reactive energy class 2
- Total active energy
- Total reactive energy
- 230V/400V 50Hz measured voltage
- 8 digit LCD display
- Programmable CT ratio
- Auxiliary supply 230V 50/60Hz
- Pulse and RS485 output
-
Inepro PRO1-Standard 45A MID Certified Single Tariffs Single Phase Network Mult...
Call for Prices- Single phase network active energy meter
- MID Certified (B and D)
- 45A Direct connected
- Single Tariff
- 17.5mm wide/1 Module
- Din Rail Mounted
- LCD Display 5+2= 99999.99
- Measured voltage 230V 50 Hz
- Calculation of total energy : Forward, Forward+Reverse, Forward-Reverse, Reverse-Forward, Reverse
- Pulse output (settable S0)
-
IME Conto D4-Sh Class 1 Single Phase & Three Phase Network kWh Meter - CT Co...
Call for Prices- Kilowatt hour / active energy meter
- 4 module DIN rail mounting
- Single phase & 3 phase (3 or 4 wire) network unbalanced load
- –/1A ,-/5A or 0.333V current transformer operated
- 190…440V 50/60Hz measured voltage
- 8 digit LCD display
- Self supplied auxiliary
- Programmable CT ratios
- Pulsed or RS485 output
-
IME IF96001 Nemo 96 HD/HD+ RS485 Modbus Communications Module
Call for Prices- RS485 communications module for use with Nemo 96HDL, Nemo 96HD and Nemo 96HD+ multifunction power monitors
- MODBUS/JBUS RTU protocol
- 38.4kb/s max baud rate
- Address selection 001 - 255
-
IME IF96003 Interface Pulse Output for energy count repetition 2 Independent and...
Call for Prices- Dual energy pulse output module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Configurable - type, weight, duration
- 2 opto relays with potential free SPST-NO contact
- 110Vdc/ac 50mA rating
-
IME IF96004 Dual Analogue Output Module 0…20 and/or 4…20mA for use with Nemo 96H...
Call for Prices- Dual analogue output module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- 2 analogue outputs 0…20mA/4…20mA
- Accuracy Class 0.5
- Load =750 ohms
-
IME IF96005 Interface Alarms - 2 Independent and Insulated Alarms
Call for Prices- Dual alarm module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- 2 independently configurable insulated alarms.
- Min or max, normally energised or de-energised.
- Hysteresis 0…20%.
- Operating delay 0…99s.
- Reset delay 0…99s.
- 2 potential free SPST contact relays.
- 5A 250Vac Cosø 1, 3A 250Vac Cosø 0.4, 5A 30Vdc.
-
IME IF96006 - Neutral current module
Call for Prices- Neutral current module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Actual measured value
- Input via external current transformer mounted on neutral. 1A or 5A secondary
- Programmable CT ratio 1…9999
-
IME IF96007A Nemo 96HD/HD+/HDLe PROFIBUS communication module
Call for Prices- Profibus communications module for use with Nemo 96HD/HD+/HDLe models multifunction power monitors
- Profibus EN50170
- 3Mb/s max baud rate
-
IME IF96010 - I/O & alarm pulse counting module
Call for Prices- I/O & alarm pulse counting module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Digital I/O and alarm pulse counting module
- 2 x potential free SPST-NO contact pulse inputs
- 2 x 8 digit counting registers for display and transmission (resettable) - typical application, gas or water meter contact input
- Display state of input contact, open or closed
- 2 alarm output contacts for alarm or process control
- Min and max
- Normally energised or de-energised
- Hysteresis 0…20%
- Operating delay 0…99s
- Reset delay 0…99s
- Contact rating 5A 250Vac Cosø 1, 3A 250Vac Cos ø 0.4, 5A 30Vdc
-
IME IF96011 - I/O & alarm pulse counting module
Call for Prices- I/O & alarm pulse counting module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Digital I/O and alarm pulse counting module
- 2 x potential free SPST-NO contact pulse inputs
- 2 x 8 digit counting registers for display and transmission (resettable) - typical application, gas or water meter contact input
- Display state of voltage level
- 2 alarm output contacts for alarm or process control
- Min and max
- Normally energised or de-energised
- Hysteresis 0…20%
- Operating delay 0…99s
- Reset delay 0…99s
- Contact rating 5A 250Vac Cosø 1, 3A 250Vac Cos ø 0.4, 5A 30Vdc
-
IME IF96012 RS485 Modbus Communications and Memory Module
Call for Prices- RS485 communications and memory module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Memory and RS485 communications
- 2 Megabyte data storage
- Real time clock with data facility
- Configurable sliding window memory with choice of four menus of recorded data
- Up to 5,760 hours of data recorded depending on menu selection and sampling time selected
- RS485 communication output
- Jbus/Modbus
- 38.4kb/s max baud rate
-
IME IF96013 M-Bus Communications Module
Call for Prices- M-Bus communications module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- M-Bus communication EN1434-3
- 9,600bit/s max baud rate
-
IME IF96014 - RS485 BacNet communication module
Call for Prices- BACNET RS485 communication ‘Native BACNET’ module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- BACNET MS-TP protocol
- 78.8kb/s max baud rate
