Rayleigh Instruments - Multifunction Meters
Multifunction Energy Meters for single-phase and three-phase MID and non-MID energy monitoring applications - direct connection or current transformer operated with a range of communication protocols including pulse, Modbus and Mbus. DIN rail mounting, panel mounting models available.
-
IME IF96006 - Neutral current module
- Neutral current module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Actual measured value
- Input via external current transformer mounted on neutral. 1A or 5A secondary
- Programmable CT ratio 1…9999
Call for Prices -
IME IF96005 Interface Alarms - 2 Independent and Insulated Alarms
- Dual alarm module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- 2 independently configurable insulated alarms.
- Min or max, normally energised or de-energised.
- Hysteresis 0…20%.
- Operating delay 0…99s.
- Reset delay 0…99s.<...
Read More »
Call for Prices -
IME IF96004 Dual Analogue Output Module 0…20 and/or 4…20mA for use with Nemo 96HD and Nemo 96HD+
- Dual analogue output module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- 2 analogue outputs 0…20mA/4…20mA
- Accuracy Class 0.5
- Load =750 ohms
Call for Prices -
IME IF96003 Interface Pulse Output for energy count repetition 2 Independent and insulated outputs - NEMO 96 HD/HD+
- Dual energy pulse output module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Configurable - type, weight, duration
- 2 opto relays with potential free SPST-NO contact
- 110Vdc/ac 50mA rating
Call for Prices -
IME IF96001 Nemo 96 HD/HD+ RS485 Modbus Communications Module
- RS485 communications module for use with Nemo 96HDL, Nemo 96HD and Nemo 96HD+ multifunction power monitors
- MODBUS/JBUS RTU protocol
- 38.4kb/s max baud rate
- Address selection 001 - 255
Call for Prices -
IME Conto D2 Class 1 Single Phase Network kWh Energy Meter (Not MID Certificated)
- Kilowatt hour / active energy meter
- 2 module wide
- DIN rail mounted
- Single phase network
- Input current 10(63)A
- Input voltage 230V
- Active energy class B (EN50470)
- Reactive energy class 2 (EN60253-23)
- Total activ...
Read More »
Call for Prices -
IME Conto 72-Sh Single and Three Phase Network Panel Mounted kWh Network Meter - CT Operated
- Kilowatt hour meter / active energy meter
- 72 x 72mm flush panel mounting
- Single phase & 3 phase (3 or 4 wire) network unbalanced load
- Active energy class 1 (EN62053-21)
- Reactive energy class 2 (EN62053-23)
- Power demand
- Power max ...
Read More »
Call for Prices -
IME Conto D4-Pt Single-Phase & Three-Phase 3-4 Network kWh Meter - Connection by CT/1A and /5A
- Kilowatt hour / active energy meter
- 4 module DIN rail mounting
- -/5A current transformer operated
- 3 phase 4 wire network unbalanced load
- Active energy class 1
- Reactive energy class 2
- Total active energy
- Total reactive ene...
Read More »
Call for Prices -
IME Conto D4-Sh Class 1 Single Phase & Three Phase Network kWh Meter - CT Connected
- Kilowatt hour / active energy meter
- 4 module DIN rail mounting
- Single phase & 3 phase (3 or 4 wire) network unbalanced load
- –/1A ,-/5A or 0.333V current transformer operated
- 190…440V 50/60Hz measured voltage
- 8 digit LCD display
- Se...
Read More »
Call for Prices -
IME Nemo D4-L+ DIN Rail Single Phase & Three Phase Network Multifunction Energy Meter
- 4 module DIN rail mounting
- Three-phase network 80...480V
- Single-phase network 45...278V
- Programmable external CT - VT ratio
- Active energy cl.1
- Pulse output
- RS485 ModBus or BACNET
Call for Prices