IME - Multifunction Meters
IME Nemo range of Multifunction Energy Meters for single phase and three phase energy monitoring applications - direct connection or current transformer operated with a range of communication protocols including pulse, Modbus, Mbus, Bacnet, Profibus and ethernet. These Nemo meters are available as DIN rail mounting and panel mounting models.
IME Strategic UK Partner Products are available to our UK Customers.
-
IME Nemo 96HDL - Easywire
Call for Prices- Built in single pulse output with 1 slot for plug in communications modules
- DIN 96x96mm, flush mounting, Backlit LCD display
- Single phase or 3-phase 4-wire unbalanced load operation
- Auxiliary voltage self supplied
- RJ45 connected 330mV Input selectable CTs
- Programmable VT ratio 100V...500KV
- Selectable CT phase correction allows reversal of L1 and L3
- - Direct voltage input 140 to 460V (phase to phase)
- - Voltage input via VT upto 1200V on VT primary
- Measured Quantities: Voltage, Current, Energy, Power, Frequency, Power Factor
-
IME Nemo 96 HDLe (Rogowski Kit) Panel Mounted Three Phase Network Multifunction ...
Call for Prices- Network monitor + 3 Rogowski current sensors
- Three-phase network 80...500V (phase-phase)
- Pulse output and RS485 communication
-
IME Nemo D4-DC Multifunction Network Monitor for Direct Current (DC)
Call for Prices- Voltage input 10...300Vdc
- Direct voltage input by external adapter up to 1500V
- Direct current input or from shunt (selectable)
- Direct input up to 10A direct current
- Input from shunt 60 – 100 – 150mV
- 2 programmable alarms
- Integrated Communication Protocols are Pulsed output and RS485 Modbus RTU
-
IME Nemo D4-Le Single & Three Phase Network Din Rail Multifunction Energy Me...
Call for Prices- 4 module wide 71.22mm
- DIN rail mounting
- Single & three phase (3 or 4 wire) network unbalanced load
- Voltage, Current, Neutral current, Average current, Peak current (resettable), Frequency, Active and reactive apparent power, Phase active and reactive apparent power, Average power, Peak power (resettable), Power factor
- Active energy class 0.5 (EN61557-12)
- Reactive energy class 1 (EN61557-12)
- Partial active energy and reactive energy(resettable)
- Hours run, Phase sequence diagnostics, Harmonic analysis, Crest factor, Phase angle
- Integrated Communication Protocols are *Pulsed output, *RS485 Modbus RTU (*depending on model ordered) or BACNET
- –/1A or –/5A (selectable) current transformer operated
- 80…450V direct or VT operated measured voltage
- Programmable current transformer ratio
- Programmable voltage transformer ratio
- Auxiliary 80-265Vac/110-300Vdc or 20…150Vdc
-
IME Nemo 96 HD+ Panel Mounted Single & Three Phase Network 0.5 Accuracy Clas...
Call for Prices- Single phase or 3-phase, 3 or 4-wire unbalanced load operation
- Measured Voltage 80-690V 50/60 Hz (phase to phase)
- Auxiliary Voltage 80-265Vac/110-300Vdc
- -/1A or -/5A CT Input selectable
-
IME Nemo 96 HD Panel Mounted Single & Three Phase Network 0.5 Accuracy Class...
Call for Prices- Single phase or 3-phase, 3 or 4-wire unbalanced load operation
- Measured Voltage 80-500V 50/60 Hz (phase to phase)
- Auxiliary Voltage 80-265Vac/110-300Vdc
- -/1A or -/5A CT Input selectable
-
IME Nemo 72-L Panel Mounted Multifunction Meter Single and Three Phase Network w...
Call for Prices- 72 x 72mm panel mounting meter
- Single-phase network 50...290V
- Three-phase network 80...500V (phase - phase)
- Current Transformer Input :- Current rating In: 5a or 1a
- Active energy class 1 (EN62053-21)
- Reactive energy class 2 (EN62053-23)
- Voltage, Current, Neutral current, Average current, Peak current (resettable), Frequency, Active and reactive apparent power, Phase active and reactive apparent power, Average power, Peak power (resettable), Power factor, Partial active energy (resettable), Hours run, Phase sequence diagnostics
- Integrated Communication Protocols are *Pulsed output or *RS485 Modbus RTU (*depending on model ordered)
- True RMS value measurement
- External CT and VT programmable (External CT ratio: 1...9999) - (External VT ratio: 1...10,0)
- Programmable voltage transformer ratio
- Auxillary Supply - Rated value Uaux ac: 48 - 115 – 230 e 240v
-
IME Nemo D4-L+ Din Rail Single Phase & Three Phase Network Multifunction Met...
Call for Prices- 4 module DIN rail mounting
- Single & three phase (3 or 4 wire) network unbalanced load
- Isolated input
- Phase sequence diagnostics
- Pulsed output, Modbus RS485 communication or M-Bus communication
- –/1A, –/5A current transformer operated
- 50…450V direct or VT operated measured voltage
- Programmable current transformer ratio
- Programmable voltage transformer ratio
-
IME Nemo D4-L Din Rail Multifunction Network Monitor For Low Voltage
Call for Prices- 4 module DIN rail mounting
- Single & three phase (3 or 4 wire) network unbalanced load
- Voltage, Current, Neutral current, Average current, Peak current (resettable), Frequency, Active and reactive apparent power, Phase active and reactive apparent power, Average power, Peak power (resettable), Power factor, Hours run
- Active energy class 1, Reactive energy class 2
- Partial active energy (resettable)
- Phase sequence diagnostics
- Pulsed output or RS485 communication
- –/1A or –/5A current transformer operated
- 50…450V direct or VT operated measured voltage
- Programmable current transformer ratio
- Programmable voltage transformer ratio
- Auxiliary 48, 115, 230Vac or 20…150Vdc
-
IME Nemo D4-Le (Rogowski Kit) DIN Rail Mounted Three Phase Network Multifunction...
Call for Prices- Network monitor + 3 Rogowsk current sensors
- Three-phase network 80...500V (phase-phase)
- Connection on dedicated Rogowski current sensors
- Pulse output and RS485 communication by ModBus RTU/TCP or BACNET protocol
