Rayleigh Instruments - Current Transformers
Our current transformers range of single phase and three phase current transformers includes moulded case, measuring, protection, toroidal, saturation, summation, core balanced, split core and high accuracy transformers, and of course Rayleigh Instruments patented easywire® current transformers.
-
Rayleigh Instruments RI-FIG3-1A Rowgowski Coil to 1A Converter
Call for Prices- DIN rail mounted
- Output 1A rms
- High bandwidth - 30…50kHz
- High accuracy
-
Datexel 3017-V Remote I/O module 8 input channels ± 10 Volt on RS-485 network -...
Call for Prices- Field-Bus remote data acquisition
- Modbus Slave device on RS-485
- Modbus RTU/ Modbus ASCII protocol
- 8 channels input up to ± 10 V
- Watch-Dog Alarm
- Remotely Configurable
- 2000 Vac 3-ways Galvanic Isolation
- High Accuracy
- UL / CE mark
- DIN rail mounting in compliance with EN-50022
-
Thiim LMWB Load Monitoring Relay - Real Power Watt - 45 mm. 2 C/O
Call for Prices- True power monitor for motors and other loads
- Temperature monitoring of motor windings
- Single and symmetric 3Ø loads
- Min. and max. monitoring
- Adjustable start-up delay 1…100s
- Off delay 0.1…50s
- Recognition of disconnected load
- Reset Key
- Fault latch
- Selectable supply voltages
-
Elster A100C Electronic MID Certified Single Phase Meter with Integrated RF Data...
Call for Prices- Accuracy Class 1 or 2
- Accuracy Class A or B
- kWh import or kWh import/export
- 7 digits. 6 Whole Kwh with 1 decimal point.
- Large digit multilingual display
- High security, compact design
- Rate select for two rate meters
-
Datexel DAT 2066 Double channel programmable transmitter for Pt100
Call for Prices- Pt100 input
- Input range programmable either with °C or °F unit measure
- Zero e Span values programmable by DIP-switches
- 4÷20 mA linearised output
- Good accuracy and performance stability
- EMC compliant – CE mark
- DIN rail mounting in according to EN-50022 and EN-50035 standards
-
Rayleigh Instruments HXE110 MID Certified 100A Single Phase GSM Solar AMR Smart ...
Call for Prices- Supplied with a Extended Terminal Cover
- Single Phase NetWork Two Wire
- 12-Month Billing Data
- LCD Display 6+2 = 999999.99 KWh LCD
- Maximum current :- 40A, 60A, 80A, 100A
- Conforms & Certified to MID B and D approval - Class 1 or 2 (IEC), Class A or B (MID)
-
RayleighConnect EC35 Three Module RS485 to GPRS (GSM) Transmitter - 128 Modbus D...
Call for Prices- 3 Module DIN Rail Mount
- RS-485 to GPRS
- 128 Modbus devices
- 2 digital inputs
- 2 analogue inputs
- 2 outputs relays
- 1-Wire bus (temp. probes and expanders)
- Dual band 2G modem (900/1800MHz)
- Mini SIM Slot
- Optional GPS
-
RayleighConnect EC30 Three Module RS485 to GPRS (GSM) Transmitter - 16 Modbus De...
Call for Prices- 3 Module DIN Rail Mount
- RS-485 to GPRS
- 2 digital inputs
- 2 outputs relays
- 16 Modbus devices
- 1-Wire bus (temp. probes and expanders)
- Dual band 2G modem (900/1800MHz)
- Mini SIM Slot
- Optional GPS
-
RayleighConnect EC15 Single Module RS485 to GPRS (GSM) Transmitter - 8 Modbus De...
Call for Prices- 18mm Wide DIN Rail Mount
- RS-485 to GPRS (GSM)
- 8 Modbus devices
- Dual band 2G modem (900/1800MHz)
- Mini SIM slot
-
RayleighConnect EC10 Single Module RS485 to GPRS (GSM) Transmitter - 1 Modbus De...
Call for Prices- 18mm Wide DIN Rail Mount
- RS-485 to GPRS (GSM)
- Supports 1 Modbus device
- Dual band 2G modem (900/1800MHz)
- Mini SIM slot
-
Rayleigh Instruments RIHXE12R MID Certified Single Phase 100A Solar Generation M...
Call for Prices- Supplied with a short terminal cover
- Single Phase NetWork Two Wire
- Current reverse indicator LCD
- LCD Display 6+2 = 999999.99 KWh LCD
- Red Static Light to show no current
- Integrated Communication Protocols is pulse output 1000 Impulse / KWh
- Conforms & Certified to MID B and D approval
- 12 Months Warranty
-
Rayleigh Instruments RI-F421 (80-500V) Single and Three Phase Network High Accur...
Call for Prices- DIN 96x96mm flush mounting meter with backlit LCD display
- Single phase or 3-phase, 3 or 4-wire unbalanced load operation
- Measured Voltage 80-500V 50/60 Hz (phase to phase)
- Current Transformer Connected 1A or - 5A CT Input
- Active energy class 0.5 (EN61557-12)
- Reactive energy class 1 (EN61557-12)
- Programmable settings:
- Input current via CT 5/5A to 50000/5A or 5/1A to 50000/1A
- Direct voltage input 80 to 500V (phase to phase)
- Voltage input via VT upto 1000V on VT primary
-
TAS-SCTEWA - Standard CT to EasyWire Adaptor -easywire®
Call for Prices- 3 x 5A inputs
- RJ45 socket for direct connection to easywire® meters
-
IME Nemo 72-L Panel Mounted Multifunction Meter Single and Three Phase Network w...
Call for Prices- 72 x 72mm panel mounting meter
- Single-phase network 50...290V
- Three-phase network 80...500V (phase - phase)
- Current Transformer Input :- Current rating In: 5a or 1a
- Active energy class 1 (EN62053-21)
- Reactive energy class 2 (EN62053-23)
- Voltage, Current, Neutral current, Average current, Peak current (resettable), Frequency, Active and reactive apparent power, Phase active and reactive apparent power, Average power, Peak power (resettable), Power factor, Partial active energy (resettable), Hours run, Phase sequence diagnostics
- Integrated Communication Protocols are *Pulsed output or *RS485 Modbus RTU (*depending on model ordered)
- True RMS value measurement
- External CT and VT programmable (External CT ratio: 1...9999) - (External VT ratio: 1...10,0)
- Programmable voltage transformer ratio
- Auxillary Supply - Rated value Uaux ac: 48 - 115 – 230 e 240v
-
IME Nemo D4-L Din Rail Multifunction Network Monitor For Low Voltage
Call for Prices- 4 module DIN rail mounting
- Single & three phase (3 or 4 wire) network unbalanced load
- Voltage, Current, Neutral current, Average current, Peak current (resettable), Frequency, Active and reactive apparent power, Phase active and reactive apparent power, Average power, Peak power (resettable), Power factor, Hours run
- Active energy class 1, Reactive energy class 2
- Partial active energy (resettable)
- Phase sequence diagnostics
- Pulsed output or RS485 communication
- –/1A or –/5A current transformer operated
- 50…450V direct or VT operated measured voltage
- Programmable current transformer ratio
- Programmable voltage transformer ratio
- Auxiliary 48, 115, 230Vac or 20…150Vdc
