Thiim - Special Relays
Thiim specializes in relay and electronic solutions, offering comprehensive monitoring and measurement products for low-voltage electrical installations, ensuring electrical safety within a large range of applications.
The range includes standard products, featuring a selection of Thiim relays, optimized for earth fault current detection, current and voltage measurement, and phase failure monitoring.
Thiim Authorised UK Trade Partner Products are available to our UK Customers.
-
Thiim DDCA Differential DC Current Relay 35mm (5…200mA IN, 4…12…20mA OUT)
- Integral Transformer
- Dipswitch selectable set-points : - 5, 10, 20, 50, 100, 200mA
- Time range during run : Separate On and Off delay 0…10 sec. adjustable
- Response Time <200msec
Call for Prices -
Thiim AISA Isolation Amplifier
- Galvanic separation > 4kV
- 8 programmable input ranges
- 8 programmable output ranges
- Excellent linearity
- Small outlines
Call for Prices -
Thiim AISB mV Transmitter
- mV to standard Current/Voltage conversion
- Galvanic separation > 4 kV
- 4 programmable input ranges
- 8 programmable output ranges
- Excellent linearity
- Small outline
Call for Prices -
Thiim AITB Loop Isolator 4-20 mA
- 4…20 mA Loop powered isolator
- Prevent lightning from spreading over the system
- Working voltage up to 1000VRMS
- Transient overvoltage up to 8000Vpeak
- Excellent linearity
- Small outlines, 17.5mm wide
Call for Prices -
Thiim AITA Triple Loop Isolator 4…20mA
- 3 Loop isolators 4…20mA in one unit
- Prevent lightning from spreading over the system
- Working voltage max.: 1000VRMS
- Transient overvoltage max.: 8000Vpeak
- Excellent linearity
- Small outlines, 35mm. wide
Call for Prices -
Thiim BMSA Battery Symmetry Monitoring Relay
- Early warning for Cell deterioration like Sulphating or internal Short Circuit
- All in one unit by Multi Range from 24…512 Volt
- No current leak through the middle point connection
- Optional Over and Under voltage monitoring
- Easy set-up by keying in ac...
Read More »
Call for Prices -
Thiim PNDA 3 Phase Under Voltage Control Relay With Phase Sequence Detection
- Under voltage detection - each phase against neutral
- Phase sequence detection
- Adjustable Sensitivity
- Adjustable differential
- Adjustable Time delays
- One unit for three mains voltages
- 6 LEDs indication of relay state
Call for Prices -
Thiim PNDI 3 Phase Under Voltage Control Relay With Phase Sequence Detection - 6 sec. at total phase loss
- Under voltage detection - each phase against neutral
- Phase sequence detection
- Adjustable Sensitivity
- Adjustable differential
- Adjustable time delays
- One unit for three mains voltages
- 6 LED indication of relay state
Call for Prices -
Thiim BRIA DC Ripple Relay for Thyristors
- One unit for all voltages 18…340Vdc
- 4 voltage sub-ranges
- High accuracy
- High sensitivity
- 3 ripple sensitivity ranges
- No separate supply power needed
- Time delay - ON and OFF - individually adjustable
Call for Prices -
Thiim BMCD Battery Under and Over Voltage Monitoring Relay
- Supply from the battery
- Programmable voltage 12V, 24V, 48V & 110V
- LEDs indicate the state of the input
- Programmable OFF delay 0…10sec or 0…100sec
- Programmable Latch for over voltage
Call for Prices
