Rayleigh Instruments - kWh Energy Meters
kWh Energy Meters for single phase and three phase MID and non MID energy monitoring applications - direct connection or current transformer operated with a range of communication protocols including pulse, Modbus RS485 RTU and Mbus.
-
IME IF2E003 - 2 module RS485 Booster Interface
- The IF2E003 RS485 Boaster
- Boost Signal when more than 1200m required
- Boost Signal after every 31devices allowing up to 255 devices
- Screw Terminals
- Auxiliary 80-270Vac/100-300Vdc
- Din rail mounted
Call for Prices -
IME IF2E002 IF Two Module Interface Communication RS485/RS232 Converter
- The IF2E002 interface converts RS485 to RS232, and RS232 to RS485
- RS232 to RS485 bidirectional communication
- Bidirectional RS232 – RS485 converter
- Galvanically isolated
- RS232: Screw Terminals
- RS485: Screw Terminals
- Auxiliary 8...
Read More »
Call for Prices -
IME IF2E011 Interface for RS485/Ethernet Conversion
- Ethernet to RS485 bidirectional communication
- Bidirectional RS485 – Ethernet converter (standard IEEE802.3)
- Galvanically isolated
- RS485: Screw Terminals
- Ethernet: RJ45
- Auxiliary 80-270Vac/100-300Vdc
- Din rail mounted
- Up ...
Read More »
Call for Prices -
IME IF4C001 Conto Imp Pulse Acquisition 4 Module To RS485 communication
- Pulse imput coming from energy, gas, water, heat meters, etc
- 12 pulse inputs SPST - NO contacts (energy, gas, water and heat meters)
- 12 non resettable independent counting registers (max 9 digits each)
- 3 different configuration
- RS485 communication M...
Read More »
Call for Prices -
IME Conto D4-Pt Single-Phase & Three-Phase 3-4 Network kWh Meter - Connection by CT/1A and /5A
- Kilowatt hour / active energy meter
- 4 module DIN rail mounting
- -/5A current transformer operated
- 3 phase 4 wire network unbalanced load
- Active energy class 1
- Reactive energy class 2
- Total active energy
- Total reactive ene...
Read More »
Call for Prices -
IME Conto D4-Pd Class 1 Three Phase Network 63 Direct Connected kWh Energy Meter
- Kilowatt hour / active energy meter
- 4 module DIN rail mounting
- Direct connection up to 63A
- 3 phase 3 or 4 wire network unbalanced load
- Active energy class 1
- Reactive energy class 2
- Total active energy
- Total reactive ener...
Read More »
Call for Prices -
IME Conto D2 Class 1 Single Phase Network kWh Energy Meter (Not MID Certificated)
- Kilowatt hour / active energy meter
- 2 module wide
- DIN rail mounted
- Single phase network
- Input current 10(63)A
- Input voltage 230V
- Active energy class B (EN50470)
- Reactive energy class 2 (EN60253-23)
- Total activ...
Read More »
Call for Prices -
IME Conto 72-Sh Single and Three Phase Network Panel Mounted kWh Network Meter - CT Operated
- Kilowatt hour meter / active energy meter
- 72 x 72mm flush panel mounting
- Single phase & 3 phase (3 or 4 wire) network unbalanced load
- Active energy class 1 (EN62053-21)
- Reactive energy class 2 (EN62053-23)
- Power demand
- Power max ...
Read More »
Call for Prices -
Inepro PRO380-MOD-CT MID Certified Dual Tariff Single and Three Phase Network Multifunction Meter With Pulse Output and Modbus RTU/RS485
- Single and Three phase network active energy meter
- MID Certified (B and D)
- CT Operated
- Dual Tariff
- 70mm wide/4 Module
- Din Rail Mounted
- LCD Display 5+2= 99999.99
- Measured voltage 230V 50 Hz
- Calculation of total ...
Read More »
Call for Prices -
Inepro PRO380-MOD 100A MID Certified Dual Tariff Single and Three Phase Network Multifunction Meter With Pulse Output and ModBus/RS485 RTU
- Single and Three phase network active energy meter
- MID Certified (B and D)
- 100A Direct connected
- Dual Tariff
- 70mm wide/4 Module
- Din Rail Mounted
- LCD Display 5+2= 99999.99
- Measured voltage 230V 50 Hz
- Calculation...
Read More »
Call for Prices
