Datexel - Signal Conditioners
The DATEXEL range of signal conditioners includes Transmitters, Temperature converters (Both analogue and digital), galvanic isolators, signal splitters, distributed I/O modules, A/D interface modules for PLC, Trip amplifiers, Power suppliers, current loop isolators, digital meters and indicators.
Datexel Strategic UK Partner Products are available to our UK Customers.
-
Datexel DAT 5021 Din Rail Dip Switch 3 Ways Isolated Programmable Signal Convert...
Call for Prices- Input for voltage and current signal
- Input range configurable by DIP-switches
- Isolated power supply source for passive current transmitter on input
- Isolated power supply source for passive loads on output
- Galvanic isolation at 1500 Vac between input, power supply and output
- Led for signalling correct power supply condition
- UL / CE mark
- DIN rail mounting in compliance with EN-50022 and EN-50035
-
Datexel DAT 4531/B Isolated converter for RTD and resistance configurable by ...
Call for Prices- Configurable input for RTD and resistance
- Configurable output in current or voltage
- Configurable by dip-switch or PC
- High accuracy
- On-field reconfigurable
- Galvanic isolation among the ways
- UL / CE mark
- Suitable for DIN rail mounting in compliance with EN-50022 and EN-50035
-
Datexel DAT 2165 Programmable Converter for Pt100
Call for Prices- Input for RTD type Pt100
- Unit of measure configurable in °C or °F
- Zero and Span values configurable by DIP-switches
- Linearised voltage or current output
- Good accuracy and performance stability
- EMC compliant – CE mark
- DIN rail mounting in compliance with EN-50022 and EN-50035
-
Datexel DAT 2065 Dip Switch Programmable Transmitter for Pt100
Call for Prices- Input for RTD type Pt100
- Unit of measure configurable in °C or °F
- Zero and Span values configurable by DIP-switches
- 4 to 20 mA linearised output on current loop
- Good accuracy and performance stability
- EMC compliant – CE mark
- DIN rail mounting in compliance with EN-50022 and EN-50035
-
Datexel DAT 4535 Din Rail Universal Input Transmitter, Configurable by Dip Switc...
Call for Prices- Universal configurable input for: mV, Tc, RTD, Res, Potentiometer, V and mA
- Configurable current output from 4 to 20 mA
- Configurable by dip-switch or PC
- High accuracy
- On-field reconfigurable
- Galvanic isolation at 1500 Vac
- EMC compliant – CE mark
- Suitable for DIN rail mounting in compliance with EN-50022 and EN-50035
-
Datexel DAT 4035 Din Rail Universal PC Configurable Transmitter. Input : mV, mA,...
Call for Prices- Configurable input for RTD, TC, mV, V, mA, Resistance and Potentiometer
- Galvanic isolation at 2000 Vac
- 4 ÷ 20 mA configurable output on current loop
- Configurable by Personal Computer
- High accuracy
- On-field reconfigurable
- EMC compliant – CE mark
- Suitable for DIN rail mounting in compliance with EN-50022 and EN50035
-
DatExel DAT 4135/SEL Din Rail Universal Input PC Configurable Converter
Call for Prices- Galvanic isolation at 2000 Vac
- Configurable output in current or voltage
- Configurable by Personal Computer
- High accuracy
- On-field reconfigurable
- EMC compliant – CE mark
- Suitable for DIN rail mounting in compliance with EN-50022 and EN50035
-
Datexel DAT 4235 Din rail universal input PC configurable converter. Input: mV, ...
Call for Prices- Configurable input for RTD, TC, mV, V, mA, Resistance and Potentiometer
- Galvanic isolation at 2000 Vac on the 3 ways
- Configurable output in current or voltage
- Configurable by Personal Computer
- High accuracy
- On-field reconfigurable
- EMC compliant – CE mark
- Suitable for DIN rail mounting in compliance with EN-50022 and EN50035
-
Datexel DAT 2015IS ATEX Intrinsically safe - Not insulated din rail PC configura...
Call for Prices- PROTECTION MODE: II 1 G Ex ia IIC T6,T5,T4 Ga certified in according to the Directive ATEX 94/9/EC
- Applicable in zones with explosion risk (ZONE 0)
- Configurable input for RTD, mV, Tc, Resistance and Potentiometer
- 4 ÷ 20 mA configurable output on current loop
- Configurable by Personal Computer, on-field reconfigurable
- High accuracy
- EMC compliant – CE mark
- Suitable for DIN rail mounting in compliance with EN-50022 and EN50035
-
Datexel DAT 205 2W Transmitter for potentiometer
Call for Prices- Input for potentiometer
- Zero and Span values adjustable by potentiometers
- 4÷20 mA current loop linearised output
- High accuracy
- EMC compliant – CE mark
- Suitable for DIN rail mounting in compliance with EN 50022 and EN-50035
-
Datexel DAT 205 3W Converter for potentiometer
Call for Prices- Input for potentiometer
- Zero and Span values adjustable by potentiometers
- Linearised output in voltage or current
- Command SEL for enable / disable output
- High accuracy
- EMC compliant – CE mark
- Suitable for DIN rail mounting in compliance with EN 50022 and EN-50035
-
Datexel DAT 5020 3 Ways Isolated Programmable Signal Converter
Call for Prices- Input for voltage, current and potentiometer signal
- Input range configurable by DIP-switches
- Isolated power supply source for passive current transmitter on input
- Voltage or current output
- Output values configurable by DIP-switches
- Galvanic isolation at 2000 Vac between input, power supply and output
- Good accuracy and performance stability
- EMC compliant – CE mark
- DIN rail mounting in compliance with EN-50022 and EN-50035
-
Datexel DAT 4135 PC Programmable Isolated Universal Signal Converter
Call for Prices- Configurable input for RTD, TC, mV, V, mA, Resistance and Potentiometer
- Galvanic isolation at 2000 Vac
- Configurable output in current or voltage
- Configurable by Personal Computer
- High accuracy
- On-field reconfigurable
- EMC compliant – CE mark
- Suitable for DIN rail mounting in compliance with EN-50022 and EN50035
