Rayleigh Instruments - Multifunction Meters
Multifunction Energy Meters for single-phase and three-phase MID and non-MID energy monitoring applications - direct connection or current transformer operated with a range of communication protocols including pulse, Modbus and Mbus. DIN rail mounting, panel mounting models available.
-
IME Nemo D4-Le (Rogowski Kit) DIN Rail Mounted Three Phase Network Multifunction Meter
- Network monitor + 3 Rogowsk current sensors
- 80mm, 142mm or 190mm coil diameter
- Three-phase network 80...500V (phase-phase)
- Connection on dedicated Rogowski current sensors
- Pulse output and RS485 communication
Call for Prices -
IME Nemo 96HDe Panel Mounted Single & Three Phase Network Multifunction Meter
- DIN 96 panel mounted
- Backlit LCD display
- Three-phase line 50...460V
- Connection on dedicated CT
- Programmable external CT ratio
- Active energy cl.1
- Pulse + RS485 ModBus output
Call for Prices -
IME Nemo 96 EA Network and Power Quality Analyser - Single & Three Phase
- DIN 96 panel mounted
- High-definition LCD display
- Single phase or Three phase
- 3 or 4-wire unbalanced load operation
- RS485 Modbus RTU/TCP
- 4 x Plug-in Modules optional
- 80…690V 50/60 Hz (phase to phase)
- -/1A or -/5A CT ...
Read More »
Call for Prices -
IME Nemo 96HDLe Single & Three Phase Network Multifunction Energy Meter
- High-definition LCD display
- Three-phase line 80...500V
- Programmable CT & VT ratio
- Active energy cl.0.5
- Pulse output
- RS485 ModBus RTU/TCP
- Single Port for Extension Modules
Call for Prices -
IME - Nemo 72-b Single or Three-Phase 4-Wire Unbalanced Multifunction Network Monitor
- DIN 72 panel mounted
- High-definition display
- Single phase or Three-phase
- Programmable primary CT
- True RMS value measurement
- 2 Programmable alarms
- Reverse power alarm
Call for Prices -
IME Nemo 72-Le Multifunction Energy Meter with Active Energy Count cl.0.5 / Reactive cl.2
- High-definition backlit display
- Single phase or 3-phase operation
- 3-phase line 80…500V
- Connection on dedicated CT
- Active energy class 0.5
- ModBus RTU/TCP or BACNET
Call for Prices -
IME Nemo D4-e Single Phase & Three Phase Multifunction Network Monitor
- High-definition backlit display
- Three-phase line 50...460V (phase-phase)
- Dedicated CT connection
- Programmable CT ratio
- Active energy cl.1
- Phase sequence correction, diagnostic
Call for Prices -
IME Nemo 96HDLe (Rogowski Kit) Panel Mounted Three Phase Network Multifunction Meter
- Network monitor + 3 Rogowski current sensors
- 80mm, 142mm or 190mm coil diameter
- Three-phase network 80...500V (phase-phase)
- Pulse output and RS485 communication
Call for Prices -
IME Conto D4-Sh Class 1 Single Phase & Three Phase Network kWh Meter - CT Connected
- Kilowatt hour / active energy meter
- 4 module DIN rail mounting
- Single phase & 3 phase (3 or 4 wire) network unbalanced load
- –/1A ,-/5A or 0.333V current transformer operated
- 190…440V 50/60Hz measured voltage
- 8 digit LCD display
- Se...
Read More »
Call for Prices -
IME Conto 72-Sh Single and Three Phase Network Panel Mounted kWh Network Meter - CT Operated
- Kilowatt hour meter / active energy meter
- 72 x 72mm flush panel mounting
- Single phase & 3 phase (3 or 4 wire) network unbalanced load
- Active energy class 1 (EN62053-21)
- Reactive energy class 2 (EN62053-23)
- Power demand
- Power max ...
Read More »
Call for Prices
