Rayleigh Instruments - Current Transformers
Our current transformers range of single phase and three phase current transformers includes moulded case, measuring, protection, toroidal, saturation, summation, core balanced, split core and high accuracy transformers, and of course Rayleigh Instruments patented easywire® current transformers.
-
EX25 - rayleighconnect Two Module RS485 to Ethernet Gateway - 128 Devices
- RS485 to Ethernet
- 128 Modbus devices
- 1 Wire bus (temp. probes and expanders)
- 1 module 5V power pack
- 10/100 Ethernet
- Built-in 64Mb memory
- No SIM subscription required
Call for Prices -
EX20 - rayleighconnect Two Module RS485 to Ethernet Gateway - 16 Devices
- RS485 to Ethernet
- 16 Modbus devices
- 1 Wire bus (temp. probes and expanders)
- 1 module 5V power pack
- 10/100 Ethernet
- Built-in 8Mb Flash memory
- No SIM subscription required
Call for Prices -
Datexel DAT 3017-I Distributed I/O Module 8 Input Channel +/- 20mA RS485 MODBUS-RTU communication protocol
- Field-Bus remote data acquisition
- Modbus Slave device on RS-485
- Modbus RTU/ Modbus ASCII protocol
- 8 channels input up to ± 20 mA
- Watch-Dog Alarm
- Remotely Configurable
- 2000 Vac 3-ways Galvanic Isolation
- High Accuracy ...
Read More »Call for Prices -
Datexel DAT 511 Current Loop Isolator
- 0÷20 mA isolated conversion
- No external supply required
- 3000 Vac galvanic isolation
- Good accuracy and performance stability
- EMC compliant – CE mark
- Suitable for DIN rail mounting in compliance with EN 50022 and EN-50035
Call for Prices -
Call for Prices
-
Rayleigh Instruments RI-D384-C Single & Three Phase Network Multifunction Energy Meter
- Single Phase Network or 3 phase 3 or 4 wire Network unbalanced load operation
- -/1A or -/5A current transformer operated
- Integrated RS485 Modbus RTU Communication
- Din Rail Mounted - 4 Module Wide
Call for Prices -
Elster A1800 Alpha Meter Polyphase Meter - Direct Connected or CT Rated
- IEC 62053 accuracy Class 0.2 %, 0.5 %, and 1.0 %
- UV-protected, polycarbonate, IP54 enclosure
- Wide operating ranges:
- Voltage: 46 V to 528 V
- Current: 1 mA to 10 A (CTconnected)
- Temperature: -40 °C to +85 °C (inside meter)
- Energy plu...
Read More »
Call for Prices -
-
Datexel 3017-V Remote I/O module 8 input channels ± 10 Volt on RS-485 network - MODBUS/RTU
- Field-Bus remote data acquisition
- Modbus Slave device on RS-485
- Modbus RTU/ Modbus ASCII protocol
- 8 channels input up to ± 10 V
- Watch-Dog Alarm
- Remotely Configurable
- 2000 Vac 3-ways Galvanic Isolation
- High Accuracy ...
Read More »Call for Prices -
Rayleigh Instruments RI-D36-80-C 80A Single Phase Kilowatt Hour Meter With Pulse Output & Modbus RS485 Communications
- Single phase energy meter
- Accuracy Class 1
- 80A Direct connected
- 36mm wide DIN rail mounting
- LCD display
- Measured voltage 230V 50/60Hz
- Modbus RS485 and Pulse output
Call for Prices
