-
Home
>
-
Monitoring Voltage Relays
Monitoring Voltage Relays
-
- Adjustable undervoltage setting 5…25% below nominal voltage
- Adjustable response setting 5…80% of undervoltage setting
- Adjustable on/off delay 0…10s
Call for Prices
-
- Relay monitors phase sequence and failure, exceeding of monitored voltage in 3 phase main
- HRN-55N - supply L1-N, it means that relay also monitors break of neutral point
- Fixed delay T1 (500ms) and adjustable delay T2 (0.1-10s)
- Faulty state is indicated by LED and output contact of relay is OFF.
- Output contact: 1 x changeover / SPDT 16 A / 250 V AC1
- 1-MODULE, DIN rail mounting
Call for Prices
-
- Monitors phase sequence and failure, exceeding of monitored voltage in 3 phase main
- HRN-55 - supply from all phases, which means that function of relay is applicable also if one phase fails
- Fixed delay T1 (500ms) and adjustable delay T2 (0.1…10s)
- Faulty state is indicated by LED and output contact of relay is OFF.
- Output contact: 1 x changeover / SPDT 16 A / 250 V AC1
- 1-MODULE, DIN rail mounting
Call for Prices
-
- 3-phase 3-wire operation
- Under voltage, over voltage and phase sequence monitoring
- 1 Changeover contact
- Auxiliary self supplied
Call for Prices
-
- Single phase AC operation
- Under voltage and over voltage monitoring
- 2 Changeover contacts
- Auxiliary self supplied
...
Call for Prices
-
- DIN Rail mounting Electronic timing relay
- Selectable functions:-
- 3 phase AC Mains Montoring Relay
- Under/over voltage
- Phase asymmetry
- Phase sequence
- Phase failure
Call for Prices
-
- DC operation
- Under voltage and over voltage monitoring
- 1 Changeover contact
- Auxiliary self supplied
...
Call for Prices
-
- AC operation - 48…276V
- Under voltage and over voltage monitoring
- Time delay:- adjustable 0…10s
- 1 Changeover contact
- Auxiliary self supplied
- Umax 160…276V, Umin 30…95% Umax
Call for Prices
-
- Two relays for individual under/over voltage indication
- Accurate adjustment
- Easy dipswitch setting
- LEDs indicate input state, relay state, timing function is active
Call for Prices
-
- Under voltage detection - each phase against neutral
- Phase sequence detection
- Adjustable Sensitivity
- Adjustable differential
- Adjustable time delays
- One unit for three mains voltages
- 6 LED indication of relay state
Call for Prices
-
- Under voltage detection - each phase against neutral
- Phase sequence detection
- Adjustable Sensitivity
- Adjustable differential
- Adjustable Time delays
- One unit for three mains voltages
- 6 LEDs indication of relay state
Call for Prices
-
- Supply from the battery
- Programmable voltage 12V, 24V, 48V & 110V
- LEDs indicate the state of the input
- Programmable OFF delay 0…10sec or 0…100sec
- Programmable Latch for over voltage
Call for Prices
-
- Multi-range 50…830V
- Single, Two or Three-phase systems
- True RMS voltage measurement
- Easy set-up
- Low power consumption
- Neutral to Ground, 3 x Phase to Phase or 3 x Phase to Neutral
- Over and Under voltage monitoring
- Time delay - On and Off
- Selectable Latched Relay function
- LED relay, latch, timing and display status
Call for Prices
-
- Adjustable undervoltage setting 5…25% below nominal voltage
- Adjustable response setting 5…80% of undervoltage setting
- Adjustable on/off delay 0…10s
Call for Prices
-
- Supply from the battery
- Programmable voltage 12V, 24V, 48V & 110V
- LEDs indicate the state of the input
- Programmable OFF delay 0…10sec or 0…100sec
- Programmable Latch for over voltage
Call for Prices