Rayleigh Instruments - kWh Energy Meters
kWh Energy Meters for single phase and three phase MID and non MID energy monitoring applications - direct connection or current transformer operated with a range of communication protocols including pulse, Modbus RS485 RTU and Mbus.
-
IME IF2E003 - 2 module RS485 Booster Interface
- The IF2E003 RS485 Boaster
- Boost Signal when more than 1200m required
- Boost Signal after every 31devices allowing up to 255 devices
- Screw Terminals
- Auxiliary 80-270Vac/100-300Vdc
- Din rail mounted
-
IME IF2E002 IF Two Module Interface Communication RS485/RS232 Converter
- The IF2E002 interface converts RS485 to RS232, and RS232 to RS485
- RS232 to RS485 bidirectional communication
- Bidirectional RS232 – RS485 converter
- Galvanically isolated
- RS232: Screw Terminals
- RS485: Screw Terminals
- Auxiliary 80-270Vac/100-300Vdc
- Din rail mounted
- Up to 255 device inputs
-
IME IF4C001 Conto Imp Pulse Acquisition 4 Module To RS485 communication
- Pulse imput coming from energy, gas, water, heat meters, etc
- 12 pulse inputs SPST - NO contacts (energy, gas, water and heat meters)
- 12 non resettable independent counting registers (max 9 digits each)
- 3 different configuration
- RS485 communication MODBUS/JBUS
- Up to 255 units may be connected to a bus system
- Data held in memory in event of power failure
-
IME IF2E011 Interface for RS485/Ethernet Conversion
- Ethernet to RS485 bidirectional communication
- Bidirectional RS485 – Ethernet converter (standard IEEE802.3)
- Galvanically isolated
- RS485: Screw Terminals
- Ethernet: RJ45
- Auxiliary 80-270Vac/100-300Vdc
- Din rail mounted
- Up to 255 device inputs
-
IME D4 Flush Mounting Adaptor - AVKIT4
- 4 module DIN rail meters flush panel mounting kit.
-
IME D4 Flush Mounting Adaptor - AVKIT4Q
- 4 module DIN rail meters flush panel mounting kit in DIN96 aperture