Modules and Accessories
-
Rayleigh Instruments RI-A5RO5A Relay Output Module for RI-F500 and RI-F550 Multi...
Call for Prices- Extends RI-F500 Series PQA Meters capabilities
- 2 x Relay Ouput Module
- Automatically recognised by RI-F500 and RI-F550 PQA Meters
-
IME IF96001 Nemo 96 HD/HD+ RS485 Modbus Communications Module
Call for Prices- RS485 communications module for use with Nemo 96HDL, Nemo 96HD and Nemo 96HD+ multifunction power monitors
- MODBUS/JBUS RTU protocol
- 38.4kb/s max baud rate
- Address selection 001 - 255
-
IME IF96003 Interface Pulse Output for energy count repetition 2 Independent and...
Call for Prices- Dual energy pulse output module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Configurable - type, weight, duration
- 2 opto relays with potential free SPST-NO contact
- 110Vdc/ac 50mA rating
-
IME IF96004 Dual Analogue Output Module 0…20 and/or 4…20mA for use with Nemo 96H...
Call for Prices- Dual analogue output module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- 2 analogue outputs 0…20mA/4…20mA
- Accuracy Class 0.5
- Load =750 ohms
-
IME IF96005 Interface Alarms - 2 Independent and Insulated Alarms
Call for Prices- Dual alarm module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- 2 independently configurable insulated alarms.
- Min or max, normally energised or de-energised.
- Hysteresis 0…20%.
- Operating delay 0…99s.
- Reset delay 0…99s.
- 2 potential free SPST contact relays.
- 5A 250Vac Cosø 1, 3A 250Vac Cosø 0.4, 5A 30Vdc.
-
IME IF96006 - Neutral current module
Call for Prices- Neutral current module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Actual measured value
- Input via external current transformer mounted on neutral. 1A or 5A secondary
- Programmable CT ratio 1…9999
-
IME IF96007A Nemo 96HD/HD+/HDLe PROFIBUS communication module
Call for Prices- Profibus communications module for use with Nemo 96HD/HD+/HDLe models multifunction power monitors
- Profibus EN50170
- 3Mb/s max baud rate
-
IME IF96010 - I/O & alarm pulse counting module
Call for Prices- I/O & alarm pulse counting module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Digital I/O and alarm pulse counting module
- 2 x potential free SPST-NO contact pulse inputs
- 2 x 8 digit counting registers for display and transmission (resettable) - typical application, gas or water meter contact input
- Display state of input contact, open or closed
- 2 alarm output contacts for alarm or process control
- Min and max
- Normally energised or de-energised
- Hysteresis 0…20%
- Operating delay 0…99s
- Reset delay 0…99s
- Contact rating 5A 250Vac Cosø 1, 3A 250Vac Cos ø 0.4, 5A 30Vdc
-
IME IF96011 - I/O & alarm pulse counting module
Call for Prices- I/O & alarm pulse counting module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Digital I/O and alarm pulse counting module
- 2 x potential free SPST-NO contact pulse inputs
- 2 x 8 digit counting registers for display and transmission (resettable) - typical application, gas or water meter contact input
- Display state of voltage level
- 2 alarm output contacts for alarm or process control
- Min and max
- Normally energised or de-energised
- Hysteresis 0…20%
- Operating delay 0…99s
- Reset delay 0…99s
- Contact rating 5A 250Vac Cosø 1, 3A 250Vac Cos ø 0.4, 5A 30Vdc
-
IME IF96012 RS485 Modbus Communications and Memory Module
Call for Prices- RS485 communications and memory module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Memory and RS485 communications
- 2 Megabyte data storage
- Real time clock with data facility
- Configurable sliding window memory with choice of four menus of recorded data
- Up to 5,760 hours of data recorded depending on menu selection and sampling time selected
- RS485 communication output
- Jbus/Modbus
- 38.4kb/s max baud rate
-
IME IF96013 M-Bus Communications Module
Call for Prices- M-Bus communications module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- M-Bus communication EN1434-3
- 9,600bit/s max baud rate
-
IME IF96014 - RS485 BacNet communication module
Call for Prices- BACNET RS485 communication ‘Native BACNET’ module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- BACNET MS-TP protocol
- 78.8kb/s max baud rate
-
IME IF96015 Nemo 96/96HD+ Ethernet Communication Module
Call for Prices- Ethernet communication module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- Ethernet RJ45 bidirectional communication
- Integrated Web Server
-
IME IF96016 - Temperature measuring module
Call for Prices- Temperature measuring module for use with Nemo 96HD and Nemo 96HD+ multifunction power monitors
- 2 x PT100 2 wire thermocouples
- Measuring range -50 to 350C, resolution ± 1C
