NEED HELP ? - Call : +44 (0)1245 428500 or email : sales@rayleigh.com
OFFICE HOURS : 9:00am - 5:30pm GMT/BST Monday to Friday

Datexel - Signal Conditioners

Datexel USA - Strategic UK Partner

The DATEXEL range of signal conditioners includes Transmitters, Temperature converters (Both analogue and digital), galvanic isolators, signal splitters, distributed I/O modules, A/D interface modules for PLC, Trip amplifiers, Power suppliers, current loop isolators, digital meters and indicators.

Datexel Strategic UK Partner Products are available to our UK Customers.

Items 1 to 15 of 28 total

Page:
  1. 1
  2. 2

Grid  List 

  • Datexel DAT 4530 4-20mA Signal Splitter/Configurable Universal Isolated Converte...

    • The DAT4530 is a 4-20mA Signal Splitter converts any universal input signal into two analog outputs.
    • The Input can be a Current (mA), Voltage (mV, Volts), Thermocouple, RTD, Resistance or Potentiometer.
    • The output is selectable from Current (mA) or Voltage and can be different from each other i.e. Channel one output can be 4-20mA and Channel 2 output can be 0-10 Volts.
    • The Signal Splitter is DIP switch programmable and PC Programmable.
    Call for Prices

  • Datexel DAT 5024/R2 Din Rail Configurable Trip Amplifier

    • Available analog inputs: RTD, TC, Voltage, Resistance and Current
    • Two independent threshold programmable as both high alarm or one high and one low alarm
    • Galvanic isolated among the three ways
    • Trip level and hysteresis adjustable by potentiometer
    • Delay time adjustable by potentiometer up to 25 sec.
    • Two relays SPDT 250Vac, 2A
    • High accuracy
    • EMC compliant – CE mark
    • Suitable for DIN rail mounting in compliance with EN-50022 and EN50035
    Call for Prices

  • Datexel DAT 5024/T1 Din Rail Configurable Trip Amplifier

    • Available analog inputs: RTD, TC, Voltage, Resistance and Current
    • Two programmable independent thresholds
    • Galvanic isolated (three ways)
    • Adjustable Trip level and Hysteresis
    • Adjustable Delay time up to 25 sec.
    • Two relays SPDT 250Vac, 2A
    • High accuracy
    • EMC compliant – CE mark
    • DIN rail mounting (EN-50022 and EN50035)
    Call for Prices

  • Datexel DAT 5024/T2 Din Rail Configurable Trip Amplifier

    • Available analog inputs: RTD, TC, Voltage, Resistance and Current
    • Two programmable independent thresholds
    • Galvanic isolated (three ways)
    • Adjustable Trip level and Hysteresis
    • Adjustable Time Delay up to 25 sec.
    • Two relays SPDT 250Vac, 2A
    • High accuracy
    • EMC compliant – CE mark
    • DIN rail mounting (EN-50022 and EN50035)
    Call for Prices

  • Datexel DAT 5024/V1 Din Rail Configurable Trip Amplifier

    • Available analog inputs: RTD, TC, Voltage, Resistance and Current
    • Two independent threshold programmable - 2 x high alarm or 1 high and 1 low alarm
    • Galvanic isolated (three ways)
    • Trip level and hysteresis adjustable by potentiometer
    • Delay time adjustable by potentiometer up to 25 sec.
    • Two relays SPDT 250Vac, 2A
    • High accuracy
    • EMC compliant – CE mark
    • Suitable for DIN rail mounting (EN-50022 and EN50035)
    Call for Prices

  • Datexel DAT 5024/V2 Din Rail Configurable Trip Amplifier

    • Available analog inputs: RTD, TC, Voltage, Resistance and Current
    • Two independent threshold programmable as both high alarm or one high and one low alarm
    • Galvanic isolated (three ways)
    • Trip level and hysteresis adjustable by potentiometer
    • Delay time adjustable by potentiometer up to 25 sec.
    • Two relays SPDT 250Vac, 2A
    • High accuracy
    • EMC compliant – CE mark
    • Suitable for DIN rail mounting (EN-50022 and EN50035)
    Call for Prices

  • Datexel DAT 5024E/1 Economic, isolated Trip Amplifier configurable by Dip-swit...

    • Input for Voltage and Current
    • Two independent thresholds
    • Type of alarm programmable by dip-switch as high or low
    • Galvanic isolated (three ways)
    • Trip level and hysteresis adjustable by potentiometers
    • Delay time adjustable by potentiometer from 1 up to 6 sec.
    • Two relays SPDT (Form C)
    • Good accuracy and linearity
    • EMC compliant – CE mark
    • Suitable for DIN rail mounting (EN-50022 and EN-50035)
    Call for Prices

  • Datexel DAT 5024E/2 Economic, isolated Trip Amplifier configurable by Dip-swit...

    • Input for Voltage and Current
    • Two independent thresholds
    • Type of alarm programmable by dip-switch as high or low
    • Galvanic isolated (three ways)
    • Trip level and hysteresis adjustable by potentiometers
    • Delay time adjustable by potentiometer from 1 up to 6 sec.
    • Two relays SPDT (Form C)
    • Good accuracy and linearity
    • EMC compliant – CE mark
    • Suitable for DIN rail mounting (EN-50022 and EN-50035)
    Call for Prices

  • Datexel DAT4035 IS ATEX Din rail universal PC configurable Transmitter. Input : ...

    • PROTECTION MODE: II 1 G Ex ia IIC T6,T5,T4 Ga certified in according to the Directive ATEX 94/9/EC
    • Applicable in zones with explosion risk (ZONE 0)
    • Configurable input for RTD, mV, Tc, Resistance and Potentiometer
    • 4 ÷ 20 mA configurable output on current loop
    • Galvanic isolation at 2000 Vac
    • Configurable by Personal Computer, on-field reconfigurable
    • High accuracy
    • EMC compliant – CE mark
    • Suitable for DIN rail mounting in compliance with EN-50022 and EN50035
    Call for Prices

  • Datexel DAT 5024/R1 Din Rail Configurable Trip Amplifier

    • Available analog inputs: RTD, TC, Voltage, Resistance and Current
    • Two independent threshold programmable as both high alarm or one high and one low alarm
    • Galvanic isolated among the three ways
    • Trip level and hysteresis adjustable by potentiometer
    • Delay time adjustable by potentiometer up to 25 sec.
    • Two relays SPDT 250Vac, 2A
    • High accuracy
    • EMC compliant – CE mark
    • Suitable for DIN rail mounting in compliance with EN-50022 and EN50035
    Call for Prices

  • Datexel DAT 5022 4 ways isolated programmable dual signal converter / signal spl...

    • Input for voltage and current signal
    • Input and output ranges configurable by DIP-switches
    • Two independent output channels
    • Isolated power supply source for passive current transmitter on input
    • Isolated power supply source for passive loads on outputs
    • Galvanic isolation at 1500 Vac between input, power supply and outputs
    • Led for signalling correct power supply condition
    • EMC compliant – CE mark
    • DIN rail mounting in compliance with EN-50022 and EN-50035
    Call for Prices

Items 1 to 15 of 28 total

Page:
  1. 1
  2. 2

Grid  List